What is a roof assessment?
A roof assessment is not the same as a roof inspection/estimate. Compare the two options here.

Inspection/Estimate Vs Assessment
For building owners on a budget For building owners who are ready to start the work
We ask a few questions to find out what shingle or materials you want to use Our 32-question “Needs Analysis Questionnaire” helps us understand past and present roofing problems
A visual inspection and measurements made from ground level A roof top inspection using our 55-point “Inspection Checklist”
Client does not have to be at the on-site meeting/inspection The client must be present at the on-site meeting/inspection
no Interior visual ceiling inspection
no Attic inspection, which includes:
no 1) Insulation calculation
no 2) NFA calculation for ventilation, to determine intake and exhaust requirements
no 3) Bathroom exhaust hook-up and requirements
no 4) Roof deck inspection
no 5) Condensation inspection
no Smoke pencil test to measure air flow
no Temperature surface testing and readings
no Moisture detection and humidity readings
no Topical view drawing of the roof scape
no Design and scope of work
no Diagram schematic for flat roofs only (slope diagram)
Calculate estimate based on replacing existing materials Manufacturers’ specifications to achieve the scope of work
no Full explanation of manufacturer warranties, how they work and options available
Delivered in mailbox or by email Meeting in person to review documentation
Total time required: 15 to 30 Minutes Total time required: 3 to 4 hours
(NOTE: Roof consultants and engineers charge between $500 and $2500 for this type of assessment)
Optional Thermal Imaging and Core Testing in the second stage: extra charge
Optional Mould and asbestos Testing: extra charge

 

A Juffs roof assessment is a more thorough investigation of your entire roofing system. We meet with you on site, complete a 32-question “Needs Analysis” and then conduct a 55-point rooftop inspection.
Our entire roof assessment process involves:

  • Interior visual ceiling inspection
  • Attic inspection, which includes:
    • Insulation calculation
    • NFA calculation for ventilation, to determine intake and exhaust requirements
    • Bathroom exhaust hook-up and requirements
    • Roof deck inspection
    • Condensation inspection
  • Smoke pencil test to measure air flow
  • Temperature surface testing and readings
  • Moisture detection and humidity readings
  • Topical view drawing of the roof scape
  • Design and scope of work
  • Diagram schematic for flat roofs only (slope diagram)
  • Manufacturers’ specifications to achieve the scope of work
  • Full explanation of manufacturer warranties, how they work and options available
  • Meeting in person to review documentation

(We can also conduct optional thermal imaging and core testing, and/or optional mold and asbestos testing for an additional fee.)

 

Contact us by phone at 416-467-4883 or fill out the form below and Juffs Roofing will contact you within 48 hours!

Please enter at least one contact number


Please tell us what type of solution you are inquiring about: *

What stage are you at right now?: *
Decision: I am looking to get the work done right awayPlanning: I'm preparing to have the work complete in 60-90 daysBudget: Gathering information to do the work in 6 months to a year

Tell us about your roofing problem


Upload photos of your roof here (optional)

Up to 6mb. Formats: gif, jpg, png, bmp, eps, tif, pict, pdf


How did you hear about Juffs Roofing? (optional)